- 0
 |
|
Features at the First Glance
 |
MIS Toner Plus is equipped with an advanced control panel. With the switches mounted on the control panel, you can start the illumination and vacuum system. And, it gives you a brief report about the status of the filters from its LCD display. |
 |
The LCD display on the panel gives precise and instant information about instant air outflow and clogging level of the filters. |
 |
When the filters are clogged, MIS Toner Plus warns the users with a sound alert to replace the filters. |
 |
MIS Toner Plus has an automatic slider door. So you can adjust its height according to how tall you are. Furthermore, it is equipped with obstruction control system. Therefore, while you are lowering down the door, the risk for your arms or hands being jammed between the cabinet door and closed hood is eliminated. |
 |
With the spacious closed hood, you can clean and refill all toner cartridges in comfort. |
 |
In addition to the florescent lamp inside the closed hood, thanks to the windows at the sides, illumination is not a problem in MIS Toner Plus. |
 |
MIS Toner Plus has an air gun installed in the closed hood. It is used to blow pressurized air in cleaning toner cartridges. It is not an electronic appliance and powered by the external air compressor unit. |
 |
In order to ease the assembling and dismantling toner cartridges, MIS Toner Plus is also equipped with an air screwdriver. Its revolving speed and direction can be adjusted easily not to damage the screws mounted on toner cartridges. |
 |
In the closed hood, there is also a waste channel. Therefore, while cleaning your toner cartridges or replacing the components such as, OPC Drum or Magnetic Roller, toner powder or packaging material can be trashed without taking the cartridge out. |
 |
Trash bag is connected to waste channel, located at the right hand side of the machine. |
 |
The last but not the least, MIS Toner Plus is also equipped with an air dryer or air filter. It is used to remove the water particles (humidity) from the blown air. And, it prevents toner powder from getting lumpy. |
 |
When the motor starts, there happens an air flow inside the closed hood through the filtration system. Therefore, in refilling toner cartridges, the floating toner powder is strained by the system and kept enclosed safely. |
- Cleans and refills all toner cartridges.
- Sophisticated filtration system powered by industry leader HEPA filters.
- HEPA filters strain fine dust including toner powder up to 0.3 micron at %99.97 efficiency rate.
- When it is considered that the average particle size ranges between 0.5 and 0.7 micron,MIS Toner Plus is the ultimate solution to clean toner cartridges.
- For the first time in the world, when the filters are clogged, MIS Toner Plus warns the user to replace them.
- Provides a spacious and illuminated closed hood to clean and refill toner cartridges.
- Therefore, you don’t need to carry toner cartridge from one place to another during cleaning and refilling process.
- Electronic check-board safeguards the entire system and halts the operation in case of malfunctions or shortcuts.
- MIS Toner Plus comes with an external air compressor unit to produce pressurized air blow.
- Air gun provides a smooth and fine cleaning of toner cartridges.
- MIS Toner Plus comes with an air screwdriver to ease assembling and dismantling toner cartridges.*
- Air drill is also offered when it is needed to drill toner cartridges.*
- Air de-ionizer neutralizes the electrical loads of the toner powder.*
- MIS Toner Plus has very low operation costs. HEPA filter is replaced in each 5,000 cartridge cleanings.
Power Unit
| * | 220V – 50 Hz. |
| * | 1.4 Amp |
| * | 0.18 Kw |
| * | 2,280 rpm |
Filtration System
| * | 2 HEPA Protective Filters |
| * | 1 HEPA Filter |
Body
| * | Aluminum Body |
| * | Electrostatic Painting |
| 1. | MIS Toner Plus Toner Workstation |
| 2. | External Air Compressor Unit |
| 3. | Air gun |
| 4. | Spare HEPA Protective Filters (2 Units) |
| 5. | User Manual |
- We process orders after receiving paid order confirmation.
- We accept T/T and PayPal.
- In payments via PayPal, charges (%4.5 of invoice value) will apply.
- Production time is 20 business days.
- We always keep the machines in stock and therefore, we usually ship the orders in 10 business days